• Products
    Room Control System

    Distributed Bus RCU

    RCU

    Bluetooth RCU

    IP20 LED Drivers

    Professional Multilevel Constant current output driver

    0/1-10V Multilevel Constant current output driver

    DALI Multilevel Constant current output driver

    LED Panel Light And Ceiling Light Driver

    Down Light and Spot Ligtht TRIAC /ELV Driver

    DC to DC 0/1-10V driver

    DC to DC DALI driver

    DC to DC DMX driver

    IP43 & IP67 LED Drivers

    Professional Constant Voltage Light Strip & Light Bar Led driver

    0/1-10V Constant Voltage Light Strip and Light Bar Led driver

    TRIAC /ELV Constant Voltage Light Strip and Light Bar Driver

    DALI Constant Voltage Light Strip and Light Bar Led driver

    High Bay Light and Spot Light Driver

    Outdoor Lighting LED driver

    Fluorescent Electronic Ballast

    0/1-10V Dimmable Electronic Ballast

    DALI Dimmable Electronic Ballast

    E-Lighting Intelligent Atmosphere Light Management Solution

    E-LIGHTING User interface unit

    E-LIGHTING Output Control Unit

    E-LIGHTING System Unit

    • Recommended products
    • New product




  • Solution
    Whether you are looking to reduce energy costs, increase comfort, or manage light control solutions, EASEIC products offer the flexibility you need with the energy savings you want.

    • Recommended solution
    • Latest solution




  • Service and support

  • About Us
    • EASEIC New York Headquarters, U.S.A.
    • 27 Hall Street, Brooklyn, NY 11205
    • 1-646-4029788





    • SMART LNN Multilevel Constant Current NON-Dimmable 27W
    • SMART LNN 27W 3-62V 180-900mA Non-Dimmable 100-240Vac
    Home > Products > IP20 LED Drivers > Professional Multilevel Constant current output driver > Smart LNN Multilevel Constant Current NON-Dimmable > SMART LNN Multilevel Constant Current NON-Dimmable 27W > SMART LNN 27W 3-62V 180-900mA Non-Dimmable 100-240Vac
      Product information
    • Approbations：            

    • Constant Current output 180-900mA.
      Multi-power driver supplied with dip-switch for the selection of the output current.
      IP20,Only for indoor use.
      Current regulation ±5 % including temperature variations.
      Class II protection against electric shock for direct or indirect contact.
      It can be used for lighting equipment in protection class I and II.
      Supplied with terminal cover and cable retainer.
      Driver can be secured with slot for screws.
      Can be switched on and off on secondary circuit for power LED.
      Over temperature protection.Overload protection by restricting output.
      Short-circuit protection with automatic restart.

    • Download Leaflet


    Specifications
    Ordering Information
    • Type
    • LNN127

    • Order Code
    • 621127

    • Full product name
    • 27W Single Channel Constant Current Output

    Input Information
    • Line Voltage
    • 100-240Vac

    • Frequency Range
    • 47-63Hz

    • Power Factor(Typ#@230VAC)
    • pf≥95% at full load

    • Efficience(Typ#@230VAC)
    • ≥95

    • Ac Current
    • 0.21@120VAC

    • Inrush Current(Typ#)
    • ≤20A@230VAC cold start with full load

    • Leakage Current
    • ≤0.5mA@230VAC

    • THD(Total Harmonic Dist#)
    • <20% at full load

    Output Information
    • Rated Power
    • 27W(Max.)

    • DC Voltage Range
    • 3-62 VDC(see output setting table)

    • Rated Current Range
    • 180-900mA (see output setting table)

    • Load Regulation
    • ±5%

    • Turn On Time
    • <1s at full load

    Dimming
    • Dimming interface
    • NA

    • Modes
    • NA

    Protections
    • Short Circuit
    • Hiccup mode protection. Recovers automatic after fault condition is removed.

    • Over Voltage
    • <30% above the maxmum output voltage listed for the specific part number.Latch mode-unit needs to be power cycled to recover

    • Over Current
    • <15% above the maximum output current listed for the specific part number. The unit limits the current. Unit autorecovers after fault is removed

    • Over Temperature
    • Unit turns off when Tc>90℃.Shuts down-unit needs to be power cycled to recover

    • Ambient Temp Range
    • -20℃ to +60℃, 20-95% RH non-condensing

    • Max Case Temperature(Tc)
    • 75℃ for Life & 85℃ for UL Safety

    Environment & Approbation
    • Working Temperature
    • _30℃ ---+60℃ at Full load

    • Working Humidity
    • 20% --- 90% RH non-condensing

    • Storage Temperature, Humidity
    • _40°C --- + 80°C, 10% --- 90% RH non-condensing

    • Vibration
    • 10 - 500Hz, 2G 10min/1 cycle period for 60 minutes along each axis (X, Y, Z)

    Safety & EMC
    • Safety Standards
    • UL8750, UL1310,UL1012,UL879,UL60950-1,CSA C22.2 No. 250.0-08(except for 15V-54V, ), EN61347-1, EN61347-2-13 independent; TUVEN60950-1 Compliant

    • EMI Conduction & Radiation
    • Compliance to EN55015 Class A, FCC 47CFR Part 15 Class

    • Harmonic Current
    • Compliance to EN61000-3-2 Class C

    • EMS Immunity
    • Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024,EN61547, Light IndustryLevel (surge 2KV), criteria A

    lifetime
    • lifetime1
    • > 50,000 hours

    Mechanical Dimensions
    • Case Length(L)
    • 118mm

    • Case Height(W)
    • 67mm

    • Case Height(H)
    • 30mm


    Related Series Product
    • 2 channel Rail Universal Dimming control module>
    • 12 Channels 10A Relay Multi-function Controller>
    • 4 Channel 2A Universal Dimmable control with switch function module>

    Looking for quality dealers or partners
    Choose your preferred country to confirm your nearest dealer or partner.
    Distributor or partner finder

    • Follow EASEIC
    • Immediately register, receive favorable information and news
    • For a detailed understanding of the use of your personal information, please view our privacy statement.

    © Easeic Inc. 2003 - 2015. All rights reserved.
    Country >